I was trying to activate Server 2019 Standard in a virtual machine this weekend, and on trying to enter the license key I got an error code of “0x80070032″ which wasn’t very helpful. This led onto trying to use slrmgr -ipk to install the license key, which also failed with ” On a computer running Microsoft Windows non-core edition, run ‘slui.exe 0x2a 0xC004F069’ to display the error text””
Mar 20, 2019 When activating Windows Server You can get an Error: 0xC004E028, like on screen below: Windows Script Host Activating Windows(R), ServerStandard edition. Windows 10 Re-Activate Licence Key with Error Code 0xC004d302. Jul 31, 2018 0xc004d302 Slui.exe 0x2a 0xc004d302 Microsoft Windows Core. Windows 8 KMS Activation. Windows non-core edition, run 'slui.exe 0x2a 0xC004d302' to. On a computer.
This can be worked around by using two DISM commands.
Open an elevated command prompt, and type (or copy) DISM.exe /Online /Get-TargetEditions
Then enter DISM /online /Set-Edition:ServerStandard /ProductKey:ENTER-YOUR-SERIAL-KEY-HERE /AcceptEula
It may get stuck on the 10% mark for a few minutes, but after that it will proceed and install the key. The machine will then require a reboot and be activated.
Dear all
We're using a Windows Server 2012 R2 (DC of a Domain) and WDS (Windows Deployment Services) to deploy a Windows 8.1 edition with a MAK (Multiple activation key).
Deployment works by PXE booting and deploying the original install.wim (from the .iso) from the WDS Server.
If we try to activate the deployed Windows on the client PC we experience the following:
1. Activation in the GUI ends with error 'Windows has detected a change to the system files that is preventing activation.'
2. Command line, slmgr /dli ends with 'Error: 0xc004d302 on a Computer running Microsoft Windows non-core edition, run slui.exe 0x2a 0xc004d302 to display the error text'
3. Command line slui.exe 0x2a 0xc004d302 ends with the error 'The security processor has reported that the trusted data store was rearmed.
Hence we cannot activate Windows.
Our Windows copy and our licenses (MAK key) were purchased thru official channels.
We urgently need this to work.
Any help is much appreciated.
Dominique, Zurich, Switzerland.
Hello,
Are we running slmgr /rearm? You may see this error if slmgr /rearm was run and the machine was not rebooted after that and then activation queries or attempts were made.
Also check the permissions on the CryptoRSAMachineKeys
cacls %systemdrive%ProgramDataMicrosoftCryptoRSAMachineKeys
post the results.
Thanks, Darrell Gorter [MSFT] This posting is provided 'AS IS' with no warranties, and confers no rights.
Similar Messages
-
Hi Guru's,
When I try to activate a data store object i get the error message :
The creation of the export DataSource failed
No authorization to logon as trusted sys tem (Trusted RC=2).
No authorization to logon as trusted sys tem (Trusted RC=2).
Error when creating the export DataSource and dependent Program ID 4SYPYCOPQ94IXEGA3739L803Z retrieved for DataStore object ZODS_PRAHi,
you are facing a issue with your source system 'myself', check and repair it. Also check if the communication user (normally ALEREMOTE) has all permissions needed.
kind regards
Siggi -
Dear Guru's
I'm new to BI 7....
I'm trying to load data to Data Store Object from PSA through DTP and it was successful upto newdata table. But while activating the request to active table the total status of the request turned as red and in DETAILS all the messages were in green. Kings of leon only by the night rar 320 ranch.
Kindly let me know what could be the problem.
Surely points will be awarded
thanks in advance...
with regards,
ViswaDear KK,
Here I printed the log pls go theough it.
Job started
Step 001 started (program RSDELPART1, variant &0000000000000, user ID 160624)
Delete is running: Data target ZIC_EX1, from 57 to 57
FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSDELPART1; row 000875
Request '57'; DTA 'ZIC_EX1'; action 'D'; with dialog 'X'
Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State '
Overall status 'Red' (user 160624)
Incorrect data could be visible in Reporting (see long text)
Status transition 2 / 3 to 9 / 9 completed successfully
SQL: 15.05.2007 13:26:26 160624
ALTER TABLE '/BIC/B0000161000' TRUNCATE PARTITION
'/BIC/B00001610000000000002'
SQL-END: 15.05.2007 13:26:26 00:00:00
Request DTPR_6K1ZWLCJLY9ZF4NLHC91N1J10 deleted from PSA;REQICODS entry also deleted
Request DTPR_6K1ZWLCJLY9ZF4NLHC91N1J10 not found in IC ZIC_EX1;CODS also deleted
Request DTPR_6K1ZWLCJLY9ZF4NLHC91N1J10 deleted from PSA;EQICODS entry also deleted
Overall status 'Deleted' (user 160624)
Delete is finished: Data target ZIC_EX1, from 57 to 57
Job finished
with regards
Viswa -
I tried to update my iPhone 3GS with iOS, data was restored but on continue with activation in the iTunes stores, it is replying 'We're sorry, we are unable to continue with your activation at this time.' what could be the reason?
Hmm, well.. iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea. -
I'm trying to get a better understanding of Windows 7 activation and rearming.
In the following scenario, does the rearm count matter?
KMS Server is in place and working fine.
Windows 7 image built
Sysprep run multiple times and the image was captured by Windows deployment services.
unattend install uses KMS client key.
The image gets deployed to multiple machines.
When running slmgr /dlv, the remaining rearm count is 1
I have verified that each deployed image has a unique client id with KMS
The machines seem to activate just fine with KMS.
In this scenario, is it OK to continue deploying this image with a rearm count of 1 or should I build a fresh image and set the skiprearm unattend option before I sysprep? I should mention the machines are laptops and may or may not be on the network for
any given period of time but do have the ability to vpn into the office where the KMS server lives.Hello smallcm,
It’s highly recommended to have more than (not equal) 1 rearm left on HDD in case further Rearms are required after the image is built.
I think you need to build a fresh image and set the skiprearm unattend option.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Windows 7 home prem
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-RGXP2-VGYK4-66TDW
Windows Product Key Hash: bh6iDDdEfdnt11w7w9wJoZnhFVk=
Windows Product ID: 00359-OEM-9800812-76771
Windows Product ID Type: 8
Windows License Type: COA SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {D9984913-49D6-43AC-AB2F-1F2AF4F2477F}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 103 Blocked VLK
Microsoft Office Enterprise 2007 - 103 Blocked VLK
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:Program Files (x86)Mozilla Firefoxfirefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Allowed
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:Windowssystem32watwatadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:Windowssystem32watnpwatweb.dll[Hr = 0x80070003]
File Mismatch: C:Windowssystem32watwatux.exe[Hr = 0x80070003]
File Mismatch: C:Windowssystem32watwatweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{D9984913-49D6-43AC-AB2F-1F2AF4F2477F}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-66TDW</PKey><PID>00359-OEM-9800812-76771</PID><PIDType>8</PIDType><SID>S-1-5-21-4099748703-2194547999-4096164433</SID><SYSTEM><Manufacturer>Sony
Corporation</Manufacturer><Model>VPCCW1WFX</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>R0210Y5</Version><SMBIOSVersion major='2' minor='4'/><Date>20091028000000.000000+000</Date></BIOS><HWID>BCA43607018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>W.
Europe Standard Time(GMT+01:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>Sony</OEMID><OEMTableID>VAIO</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>103</Result><Products><Product
GUID='{90120000-0030-0000-0000-0000000FF1CE}'><LegitResult>103</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>ACD7202654E586</Val><Hash>fFic3JgCreGGRxyF8uMWB4R4Jcg=</Hash><Pid>89388-707-1528066-65794</Pid><PidType>14</PidType></Product></Products><Applications><App
Version='12' Result='103'/><App Version='12' Result='103'/><App Version='12' Result='103'/><App Version='12'
Result='103'/><App Version='12' Result='103'/><App Version='12' Result='103'/><App Version='12' Result='103'/><App
Version='12' Result='103'/><App Version='12' Result='103'/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_COA_SLP channel
Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00196-008-176771-02-10241-7601.0000-1442014
Installation ID: 020785991595288705997481458446612313427665140196257250
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 66TDW
License Status: Initial grace period
Time remaining: 38760 minute(s) (26 day(s))
Remaining Windows rearm count: 3
Trusted time: 5/24/2014 7:56:34 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NgAAAAEABAABAAEAAAABAAAABAABAAEA6GGyp3B1EK8suNLMen+U8sJaainsFpaLCYtgR0bK
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC Sony VAIO
FACP Sony VAIO
HPET Sony VAIO
MCFG Sony VAIO
SLIC Sony VAIO
SSDT Sony VAIO
SSDT Sony VAIOFile Scan Data-->
File Mismatch: C:Windowssystem32watwatadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:Windowssystem32watnpwatweb.dll[Hr = 0x80070003]
File Mismatch: C:Windowssystem32watwatux.exe[Hr = 0x80070003]
File Mismatch: C:Windowssystem32watwatweb.dll[Hr = 0x80070003]
<SYSTEM><Manufacturer>Sony Corporation</Manufacturer><Model>VPCCW1WFX</Model>
Sometime this File Mismatch can occur due to a storage driver error.
If your computer is the Sony Vaio model above, Sony have provided an updated storage driver here:
http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCCW1WFXU&upd_id=6175&os_group_id=6
install the storage driver and see if the problem is resolved.
Don
(Please take a moment to 'Vote as Helpful' and/or 'Mark as Answer', where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Hi,
I have a Windows 7 Professional from Microsoft Academic Alliance. I had it on my computer for more than an year, and today I decided to reinstall it because of some errors which accumulated. I am still a student at the same university, so I should be entitled
to use it. I didn't do any hardware changes.
Well, when trying to activate I get the error written above. I contacted Microsoft by phone and, after some 20 mins conversation where they verified the product key and asked for my full name, they ended up saying that it is a technical problem, and I should
either consult this forum or require technical support from support.microsoft.com/oas/.
I read here that one common error is to overrun the activation limit, and this issues is solved when phoning, yet the Microsoft support did not mention anything like that.
If you have any ideas, I'd be thankful.As I understand from the indicated post and by contacting Microsoft by phone yesterday, it's not an issue with the number of available activations; it appears to be a technical issue.
Here is the output of MGADiag:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-88369
Windows Product Key Hash: XPr1IVcXp3Bo8Roe7qnE24gasxw=
Windows Product ID: 55041-090-1331166-86116
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {113181C1-A842-4FC1-9B50-82562CEB4AD9}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:Program Files (x86)Mozilla Firefoxfirefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{113181C1-A842-4FC1-9B50-82562CEB4AD9}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-090-1331166-86116</PID><PIDType>6</PIDType><SID>S-1-5-21-561505280-1044226414-1653550370</SID><SYSTEM><Manufacturer>ASUSTeK
Computer Inc. </Manufacturer><Model>N61Jq</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>N61Jq.208</Version><SMBIOSVersion
major='2' minor='6'/><Date>20100330000000.000000+000</Date></BIOS><HWID>41773B07018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Mountain Standard Time(GMT-07:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>_ASUS_</OEMID><OEMTableID>Notebook</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-090-133116-03-1033-7600.0000-3642013
Installation ID: 002724853412325811151235960653003510623466424155626746
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 88369
License Status: Initial grace period
Time remaining: 41880 minute(s) (29 day(s))
Remaining Windows rearm count: 4
Trusted time: 12/31/2013 4:54:21 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NAAAAAIAAQABAAEAAAADAAAAAwABAAEA6GGetncWxgj6Ql4hYLZiPWaevX7Oqo6Akvp2Vg
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC _ASUS_ Notebook
FACP _ASUS_ Notebook
DBGP _ASUS_ Notebook
HPET _ASUS_ Notebook
MCFG _ASUS_ Notebook
ECDT _ASUS_ Notebook
SLIC _ASUS_ Notebook
SSDT PmRef CpuPm
DMAR INTEL CP_FIELD -
I'm seeking some insight on if (and how) remote blobs are migrated. For example, if I've configured RBS for SharePoint 2010 but I'm approaching the storage maximum on the hardware of my remote blob location - how would I go about moving the blobs elsewhere and 'pointing' Sql Server and SharePoint to the new locations? In addition, if I were to simply add another storage location - how does one go about re-configuring the RBS to store blobs in a new/additional location?
TIA.
-Tracy1.
Live SharePoint 2010 environment with SQL 2008 R2
a.
Take back up from 2010 live server.
i.
Open management studio on SQL server.
ii.
Take back up of content database of live application.
2.
QA SharePoint 2010 environment with SQL 2008 R2
a.
Restore SQL backup
i.
Open management studio on SQL server.
ii.
Restore database.
b.
Create Web Application
i.
Open SharePoint server
ii.
Open central admin
iii.
Create web application with classic authentication.
c.
Dismount database which is with existing application
i.
Open SharePoint PowerShell on SharePoint server.
ii.
Fire below command.
Dismount-SPContentDatabase <Database name>
Note: Change the database name.
d.
Mount restored database with existing application
i.
Open SharePoint PowerShell on SharePoint server.
ii.
Fire below command.
Mount-SPContentDatabase <Database name> -DatabaseServer <Database server name > -WebApplication <Web application>
Note: Change the database name and web application URL.
iii.
Open SharePoint Designer and change the master page and publish it.
iv.
Set the Test page as Home page.
v.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
e.
Configure RBS
i.
Enable FILESTREAM on the database server
Open SQL Server Configuration manager on SQL Server.
From left panel click on SQL Server Services.
From right panel select the instance of SQL Server on which you want to enable FILESTREAM.
Right-click the instance and then click Properties.
In the SQL Server Properties dialog box, click the FILESTREAM tab.
Select the Enable FILESTREAM for Transact-SQL access check box.
If you want to read and write FILESTREAM data from Windows, click Enable FILESTREAM for file I/O streaming access. Enter the name of the Windows share in the Windows Share Name box.
If remote clients must access the FILESTREAM data that is stored on this share, select allow remote clients to have streaming access to FILESTREAM data.
Click Apply and ok.
ii.
Set FILESTREAM access level
Open SQL management studio and connect SQL database instance.
Right click on database instance and open Property.
Go to: click on advanced from left panel.
Find the “Filestream Access Level” property and set the value “Full access enabled”
Click OK and exit window.
iii.
Set SharePoint Configure FILESTREAM access level
Open Query window on root
Execute following query
EXEC sp_configure filestream_access_level, 2
RECONFIGURE
Restart SQL services
Note: You will get message” Configuration option 'filestream access level' changed from 2 to 2. Run the RECONFIGURE statement to install.”
iv.
Provision a BLOB store for each content database
Click the content database for which you want to create a BLOB store, and then click New Query
Execute following query
use [<Database name>]
if not exists
(select * from sys.symmetric_keys
where name = N'##MS_DatabaseMasterKey##')
create master key encryption by password = N'Admin Key Password !2#4'
Note:
Change the database name
You get “Command(s) completed successfully.” Message.
use [<Database name>]
if not exists
(select groupname from sysfilegroups
where groupname=N'RBSFilestreamProvider')
alter database [<Database name>]
add filegroup RBSFilestreamProvider contains filestream
Note:
Change the database name.
You get “Command(s) completed successfully.” Message.
use [<Database name>]
alter database [<Database name>]
add file (name = RBSFilestreamFile, filename =
'<E:SQLDataPetroChina>')
to filegroup RBSFilestreamProvider
Note:
Change the database name and store path.
If you get message “FILESTREAM file 'RBSFilestreamFile' cannot be added because its destination filegroup cannot have more than one file.”
Ignore it.
v.
Install the RBS client library on each Web server
To install the RBS client library on the on the first Web server
Open SharePoint Web server
Open command prompt.
Execute following command
msiexec /qn /lvx* rbs_install_log.txt /i RBS.msi TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME=<Database name> DBINSTANCE=<Database server> FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1
Note:
Change the database name and database instance name.
DB instance should be <server nameinstance name>
Download RBS.msi for respective SQL version.
To install the RBS client library on all additional Web and application serversOpen SharePoint Web server
Open command prompt.
Execute following command
msiexec /qn /lvx* rbs_install_log.txt /i RBS.msi DBNAME=<Database name> DBINSTANCE=<Database server> ADDLOCAL=Client,Docs,Maintainer,ServerScript,FilestreamClient,FilestreamServer
Note:
Change the database name and database instance name.
DB instance should be <server nameinstance name>
vi.
Enable RBS for each content database
You must enable RBS on one Web server in the SharePoint farm. It is not important which Web server that you select for this activity. You must perform this procedure once for each content database.
Open SharePoint web server
Open SharePoint PowerShell
Execute below script
$cdb = Get-SPContentDatabase <Database name>
$rbss = $cdb.RemoteBlobStorageSettings
$rbss.Installed()
$rbss.Enable()
$rbss.SetActiveProviderName($rbss.GetProviderNames()[0])
$rbss
Note: Change the database name.
vii.
Test the RBS installation
On the computer that contains the RBS data store.
Browse to the RBS data store directory.
Confirm that size of RBS data store directory.
On the SharePoint farm, upload a file that is at least 100 kilobytes (KB) to a document library.
On the computer that contains the RBS data store.
Browse to the RBS data store directory.
Confirm that size of RBS data store directory.
It must be more than before.
viii.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
f.
Migrate RBLOB from RBS to SQL database and completely remove RBS
i.
Migrate all content from RBS to SQL and disable RBS for content DB:
Open SharePoint server.
Open SharePoint management PowerShell
Execute below script
$cdb=Get-SPContentDatabase <Database name>
$rbs=$cdb.RemoteBlobStorageSettings
$rbs.GetProviderNames()
$rbs.SetActiveProviderName(')
$rbs.Migrate()
$rbs.Disable()
Note:
Migrate() might take some time depending on amount of data in your RBS store.
Change the database name.
If you get message on the PowerShell “PS C:Userssp2010_admin> $rbs.Migrate()
Could not read configuration for log provider <ConsoleLog>. Default value used.
Could not read configuration for log provider <FileLog>. Default value used.
Could not read configuration for log provider <CircularLog>. Default value used.
Could not read configuration for log provider <EventViewerLog>. Default value used.
Could not read configuration for log provider <DatabaseTableLog>. Default value used.” Then wait for while it will take some time to start migration.”
ii.
Change the default RBS garbage collection window to 0 on your content DB:
Open SQL server
Open SQL management studio
Select your content DB and open new query window
Execute below SQL query
exec mssqlrbs.rbs_sp_set_config_value ‘garbage_collection_time_window’,'time 00:00:00′
exec mssqlrbs.rbs_sp_set_config_value ‘delete_scan_period’,'time 00:00:00′
Note:
Run one by one SQL query
You will get “Command(s) completed successfully.” Message
iii.
Run RBS Maintainer (and disable the task if you scheduled it):
Open SharePoint server
Open command prompt
Run below command
'C:Program FilesMicrosoft SQL Remote Blob Storage 10.50MaintainerMicrosoft.Data.SqlRemoteBlobs.Maintainer.exe' -connectionstringname RBSMaintainerConnection -operation GarbageCollection ConsistencyCheck ConsistencyCheckForStores -GarbageCollectionPhases
rdo -ConsistencyCheckMode r -TimeLimit 120
iv.
Uninstall RBS:
Open SQL server
Open SQL management studio
On your content DB run below SQL query
exec mssqlrbs.rbs_sp_uninstall_rbs 0
Note:
If you will get message “The RBS server side data cannot be removed because there are existing BLOBs registered. You can only remove this data by using the force_uninstall parameter of the mssqlrbs.rbs_sp_uninstall stored pro” then run this “exec mssqlrbs.rbs_sp_uninstall_rbs
1 ”
You will get “Command(s) completed successfully.” Message.
v.
Uninstall from add/remove SQL Remote Blob Storage.
I found that there were still FILESTREAM references in my DB, so remove that reference
Open SQL server
Open SQL management studio
Run below SQL query on your content DB:
ALTER TABLE [mssqlrbs_filestream_data_1].[rbs_filestream_configuration] DROP column [filestream_value]
ALTER TABLE [mssqlrbs_filestream_data_1].[rbs_filestream_configuration] SET (FILESTREAM_ON = 'NULL')
Note:
Run one by one SQL query
vi.
Now you can remove the file and filegroup for filestream:
Open SQL server
Open SQL management studio
Open new query window on top
Execute below SQL query
ALTER DATABASE <Database name> Remove file RBSFilestreamFile;
Note:
Change the database name
If it gives message “The file 'RBSFilestreamFile' cannot be removed because it is not empty.” Then remove all table prefix with “mssqlrbs_” from your database and execute SQL query again.
This query takes time as per your database size (almost 30 min).
You will get “The file 'RBSFilestreamFile' has been removed.” Message
Execute below SQL query
ALTER DATABASE <Database name> REMOVE FILEGROUP RBSFilestreamProvider;
Note:
Change the database name
You get “The filegroup 'RBSFilestreamProvider' has been removed.” Message.
Or If you get “Msg 5524, Level 16, State 1, Line 1 Default FILESTREAM data filegroup cannot be removed unless it's the last
FILESTREAM data filegroup left.” message. Then ignore this message.
vii.
Remove Blob Store installation
Open SharePoint server
Run RBS.msi setup file and choose Remove option.
Finish wizard.
viii.
Disable FILESTREAM in SQL Configuration Manager
Disable FILESTREAM in SQL Configuration Manager for your instance (if you do not use it anywhere aside this single content DB with SharePoint), run SQL reset and IIS reset and test.
ix.
Test the RBS Removed or not?
On the computer that contains the SQL database.
Confirm that size of SQL database (.mdf file).
On the SharePoint farm, upload a file that is at least 100 kilobytes (KB) to a document library.
On the computer that contains the SQL database.
Confirm that size of SQL database.
It must be more than before. If there is no difference then ignore it. Just check it Store is no more in SQL.
x.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
g.
Convert classic-mode web applications to claims-based authentication
i.
Open SharePoint server
ii.
Open SharePoint PowerShell
iii.
Execute below script
$WebAppName = '<URL>'
$wa = get-SPWebApplication $WebAppName
$wa.UseClaimsAuthentication = $true
$wa.Update()
$account = '<Domain nameUser name>'
$account = (New-SPClaimsPrincipal -identity $account -identitytype 1).ToEncodedString()
$wa = get-SPWebApplication $WebAppName
$zp = $wa.ZonePolicies('Default')
$p = $zp.Add($account,'PSPolicy')
$fc=$wa.PolicyRoles.GetSpecialRole('FullControl')
$p.PolicyRoleBindings.Add($fc)
$wa.Update()
$wa.MigrateUsers($true)
$wa.ProvisionGlobally()
iv.
Test user logging
Logging with the 2-3 different users and test they can able to logging.
h.
Take SQL backup from QA server
i.
Open SQL server
ii.
Open management studio on SQL server
iii.
Select the content database
iv.
Take back up of content database
Information: This SQL backup is not content RBS.
3.
New SharePoint 2013 environment with SQL 2012
a.
Restore SQL backup
i.
Open SQL server
ii.
Open SQL management studio
iii.
Restore the SQL database using *.bak file
b.
Dismount database which is with existing application
i.
Open SharePoint server
ii.
Open SharePoint management PowerShell
iii.
Execute below script
Dismount-SPContentDatabase <Database name>
Note: change the database name which bind with existing application.
c.
Mount restored database with existing application
i.
Open SharePoint server
ii.
Open SharePoint management PowerShell
iii.
Execute below script
Mount-SPContentDatabase <Database name> -DatabaseServer <Database server name> -WebApplication <URL>
Note:
Change the database name with new restored database name
Change the database server name in form of “DB server nameDB instance name”
Change the URL of web application
This command take some time.
d.
Upgrade site collection
i.
Open SharePoint server
ii.
Open new site
iii.
You will find message on top “Experience all that SharePoint 15 has to offer. Start now or Remind me later”
iv.
Click on “Start”
v.
Click on ”Upgrade this Site Collection”
vi.
Click on “I Am ready”
vii.
After some time you will get message “Upgrade Completed Successfully”
viii.
Test User logging. -
hi
Please consider the example application created using JDeveloper 11.1.2.3.0
at http://www.consideringred.com/files/oracle/2013/UncommittedDataReviewApp-v0.01.zip
It contains a page which has an af:document with uncommittedDataWarning='on' [1], and next to a regular af:commandLink also an af:commandLink with immediate='true' combined with an af:checkUncommittedDataBehavior component [2].
It allows to get warnings like
'This page contains uncommitted data.
Would you like to perform navigation?
Pres OK to continue, or Cancel to abort navigation.'
which allow you to choose if you want to continue the navigation or not.
See also the screencast at http://screencast.com/t/IBujeLmKE
question :
- (q1) What would be the preferred (and future proof) way to prevent navigation on uncommitted data (instead of just a warning)?
- [1] see http://docs.oracle.com/cd/E35521_01/apirefs.111230/e17491/tagdoc/af_document.html
- [2] see http://docs.oracle.com/cd/E35521_01/apirefs.111230/e17491/tagdoc/af_checkUncommittedDataBehavior.html
many thanks
Jan VerveckenThanks for your reply Frank.
Frank Nimphius wrote:
.. So if this works as with how you change the ADFc exception handler, then its by a file with this name in the application META-INF/service folder (the latter doesn't exist by default). ..The documentation section '22.5.3 How to Designate Custom Code as an Exception Handler '
at http://docs.oracle.com/cd/E35521_01/web.111230/e16182/taskflows_complex.htm#ADFFD22602
says directory path 'application_root.adfMETA-INFservices'.
.. However, the default abstract class is DirtyPageHandler and this is in a public package. ..Sure, but (without documentation) it does not seem trivial to extend it and implement a custom implementation.
Reviewing some parts of the ADF framework source code suggest this API has some obscure aspects.
A DirtyPageContext seems to be passed between AdfcDirtyPageHandler and ControlFlowEngine via a request attribute.
adf_111230_6276_source.zip!oracleadfinternalcontrollerapplicationAdfcDirtyPageHandler.java
public void trackNavigation(DirtyPageHandler.DirtyPageContext dirtyContext)
if (dirtyContext != null)
// Store DirtyPageContext on the request for future use
Map<String, Object> requestMap = JsfInterface.getInstance().getRequestMap();
requestMap.put(StateParams.DIRTY_PAGE_CONTEXT_KEY, dirtyContext);
}So, is ControlFlowEngine (also in an 'adfinternal' package) intended to be extended/overridden/replaced/customized somehow, or does a custom DirtyPageHandler also have to use this StateParams.DIRTY_PAGE_CONTEXT_KEY request attribute technique?
adf_111230_6276_source.zip!oracleadfinternalcontrollerengineControlFlowEngine.java
private boolean cancelNavigationCheck(AdfcContext adfcContext, ActivityId currentActivityId,
ActivityId nextActivityId, Activity activity, String fromAction,
String outcome)
Object value = requestMap.get(StateParams.DIRTY_PAGE_CONTEXT_KEY);
DirtyPageHandler.DirtyPageContext dirtyHandler = null;
if (value instanceof DirtyPageHandler.DirtyPageContext)
dirtyHandler = (DirtyPageHandler.DirtyPageContext)value;
else
return false;
}Also a framework 'adfinternal' RichPhaseListener has a rather explicit dependency on the DirtyPageContextImpl class because it is calling static methods on this implementation class.
adf_111230_6276_source.zip!oracleadfinternalviewfacescontextRichPhaseListener.java
public void beforePhase(PhaseEvent event)
if (phaseId PhaseId.APPLY_REQUEST_VALUES)
// Check we we received response from the navigation confirmation dialog
if (!DirtyPageContextImpl.checkConfirmNavigationResponse())
else if (phaseId PhaseId.INVOKE_APPLICATION)
// Inform DirtyPageHandler that it needs to track navigation (if enabled)
DirtyPageContextImpl.initDirtyPageContext();
}This suggests that no alternative implementation for DirtyPageContextImpl is possible.
But it seems to be the DirtyPageContextImpl class that is responsible for (part of) the 'ui interaction', which seems to be what should change to prevent navigation on uncommitted data.
adf_111230_6276_source.zip!oracleadfinternalviewfacescontextDirtyPageContextImpl.java
public void confirmNavigation(String confirmationToken)
script.append('AdfPage.PAGE.confirmNavigation(');
service.addScript(context, script.toString());
static boolean checkConfirmNavigationResponse()
String param = external.getRequestParameterMap().get(_CONFIRMATION_RESPONSE_PARAM);
}So, a rather obscure API.
.. Maybe worth filing an ER to get a public listener / hook into this instead of dealing with your own implementation. Will file one ..
.. ER 16663793 ..Sounds like a good idea.
On My Oracle Support I have been able to find enhancement request 16663793, 'PROVIDE HOOK INTO DIRTY PAGE WARNING FOR CUSTOMERS TO HANDLE W. CUSTOM DIALOG' (after requesting it to be published in service request 3-7073188791).
But, for the current version my question (q1) remains:
- (q1) What would be the preferred (and future proof) way to prevent navigation on uncommitted data (instead of just a warning)?
many thanks
Jan Vervecken -
I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says 'connection to server lost'. I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see 'no service' there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says 'SIM not provisioned'. HELP and Thank you in advance.
Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling -
I went to change a user password on the server today and after changing the password I logged into the SQL server to run “Import-module dirsync” & “Start-onlinecoexistencesync” in powershell in order to sync the new password with Exchange Online. Mac pdf watermark. After
waiting ten minutes I tried setting up the email on the user’s PC but the new password was not being accepted. I logged into Office 365 and I got the following warning.
'Warning: Last synced more than 3 days ago | Troubleshoot'
So I pressed troubleshoot and the site installed a tool on the server to try and find out what the issue was. After the tool ran it told me that the version of dirsync.exe was out of date and that I should download the new one and install it. So I downloaded
the new dirsync.exe (version 7020 I believe) and tried installing it. I kept getting error after error, different ones to boot.
First it told me I wasn’t part of the FIMSyncAdmins group (so I added myself), then it told me that it could not connect to MIIS server, so I tried starting it and windows said that there was a problem with the sign on used by the service so I had
to reset the password for the local user named “AAD_bfd1d6f0cef7” which was being used by that service. The service started successfully and when I went to install it told me I could not and if the problem persisted I should uninstall the old version and reinstall.
Looking in the log file, before I even install the software I see the following Information..
Level: Information
Date: 2015-03-24 12:49:17 PM
Source: Directory Synchronization
Event ID: 0
Task Category: None
'The current configuration of the Windows Azure Active Directory Sync tool is invalid. Please reinstall the Windows Azure Active Directory Sync tool.'
So I tried to reinstall (i even manually uninstalled the old version and removed the folder in C:Program Files called 'Windows Azure Active Directory Sync') and on reinstall I get as far as 'Installing Components' and then after a little
while it errors out with the error 'The install was unable to setup a required component. Check the event logs for more information. Please try the installation again and if the error persists, contact Technical Support. '
Looking at the log file there are a bunch of new entries, created by the installer. There's over 300 new entries and I can not post them all here due to character count restriction. you can find the log file here..
www.clarkfreightways.com/wp-content/uploads/2015/03/dirsync_log.txt
Can anyone tell me what is going on, I've been looking through the log files and I can see errors but I'm not sure what to do to fix it.Greetings!
Wanted to know if you've hosted the DirSync tool (latest version) on a VM? Also, if this is deployed in a Production or Lab environment? If it's a lab setup, you may
try installing the DirSync on a new VM / Server (suspecting that it could be some machine related issues).
Here's a Support KB helping with different errors:
http://support.microsoft.com/en-us/kb/2684395
If its a production environment, would suggest to raise a
Technical Support Ticket for assisting further with break-fix.
Thank you,
ArvindLearn more about Amazon Prime.Christopher added it Feb 13, Chief Mentor of website www. Md Saheb is currently reading it Oct 25, Saurabh Parashar marked it as to-read Feb 13, Add to Cart Add to Wishlist. Manikandan marked it as to-read Oct 12, Delivery and Returns see our delivery rates if policies thinking of returning an item?Arnav Arnav marked it as to-read Jul 24, Want to Read Currently Reading Read. Sourabh Chowrasiya rated it it was amazing Sep 18, Keep up the good work! Out of stock Add to Wishlist. Handbook of banking information n toor pdf files free.
-
Is it possible to integrate the users and passwords of an Oracle Database running on Solaris with the users and passwords defined in a Windows 2000 Active Directory? What are the requirements and the necesary steps?
I've read the documentation and it shows how to do it if you install Oracle in a Windows 2000 Server, but it does not mention about installing it in any kind of Unix.You should consider to base your firm security and central user repository on REALLY SECURE and ROBUST product technology. Not on Windows 2000 Active Directory. Win2K AD is known to be slow and insecure. If you have Oracle on Solaris your data is secure and next step is to move user accounts to real user repository. It may be one of well-known LDAP servers. Try to read some materials on CERT Coordination Center (http://www.cert.org) which describe LDAP servers. After this you can choose the server which best suite your needs.
-
Hi,
Currently, using one way SSL, we get a 200 millisecond overhead from the client perspective. I have a gut feel that the trust key store check adds a lot of overhead (since it does an I/O check)
if my gut is right ..
IS there anyway to cache the trust keys store (I am using a stand alone java client running it on Junit)
Thankswhat this means to an end user ?I have no idea, but what it means to me is that JBoss don't understand the difference between them any more than you did when you asked the question.
A keystore is a high-security item that needs to be kept under lock and key as it contains credentials sufficient to identify that peer legally, and I mean in a courtroom in a dispute over millions of dollars. A truststore on the other hand is a collection of public certificates whose security requirement is to prevent people adding untrustworthy certificates to it. A completely different matter. In any large organization, the personnel with the authority over the keystore would never be the same as the personnel with authority over the truststore. Putting both in the same file compromises the security of both. It makes no sense whatsoever. -
Hi,
I found the thread Cannot attach data store shared-memory segment using JDBC (TT0837) but it can't help me out.
I encounter this issue in Windows XP, and application gets connection from jboss data source.
url=jdbc:timesten:direct:dsn=test;uid=test;pwd=test;OraclePWD=test
username=test
password=test
Error information:
java.sql.SQLException: [TimesTen][TimesTen 11.2.1.5.0 ODBC Driver][TimesTen]TT0837: Cannot attach data store
shared-memory segment, error 8 -- file 'db.c', lineno 9818, procedure 'sbDbConnect'
at com.timesten.jdbc.JdbcOdbc.createSQLException(JdbcOdbc.java:3295)
at com.timesten.jdbc.JdbcOdbc.standardError(JdbcOdbc.java:3444)
at com.timesten.jdbc.JdbcOdbc.standardError(JdbcOdbc.java:3409)
at com.timesten.jdbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:813)
at com.timesten.jdbc.JdbcOdbcConnection.connect(JdbcOdbcConnection.java:1807)
at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:303)
at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:159)
I am confused that if I use jdbc, there is no such error.
Connection conn = DriverManager.getConnection('url', 'username', 'password');
Regards,
NestaI think error 8 is
net helpmsg 8
Not enough storage is available to process this command.
If I'm wrong I'm happy to be corrected. If you reduce the PermSize and TempSize of the datastore (just as a test) does this allow JBOSS to load it?
You don't say whether this is 32bit or 64bit Windows. If it's the former, the following information may be helpful.
'Windows manages virtual memory differently than all other OSes. The way Windows sets up memory for DLLs guarantees that the virtual address space of each process is badly fragmented. Other OSes avoid this by densely packing shared libraries.
A TimesTen database is represented as a single contiguous shared segment. So for an application to connect to a database of size n, there must be n bytes of unused contiguous virtual memory in the application's process. Because of the way Windows manages DLLs this is sometimes challenging. You can easily get into a situation where simple applications that use few DLLs (such as ttIsql) can access a database fine, but complicated apps that use many DLLs can not.
As a practical matter this means that TimesTen direct-mode in Windows 32-bit is challenging to use for those with complex applications. For large C/C++ applications one can usually 'rebase' DLLs to reduce fragmentation. But for Java based applications this is more challenging.
You can use tools like the free 'Process Explorer' to see the used address ranges in your process.
Naturally, 64-bit Windows basically resolves these issues by providing a dramatically larger set of addresses.' -
I am trying to create an ODI Interface with couple of source tables and one target table. Say for example I am using the following data structure in my target table.
Order (Target Table)
order id
product id
customer id
address id
warehouse id
shipment id
for the above target table i need to extract data from each of the following source tables.
orderitem
product
customer
address
warehouse
shipment
Total 6 source tables i need to join however and load data for target table.
When I drag source data stores in to ODI interface mapping tab It throws the following Null Pointer Error. Due to this error I am not able to map target table with all the source tables.
Please suggest me what could be the reason for the error.
Error:
java.lang.NullPointerException
at oracle.odi.interfaces.interactive.support.clauseimporters.ClauseImporterDefault.importClauses(ClauseImporterDefault.java:81)
at oracle.odi.interfaces.interactive.support.actions.InterfaceActionAddSourceDataStore.performAction(InterfaceActionAddSourceDataStore.java:124)
at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:845)
at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:821)
at oracle.odi.ui.OdiSdkEntityFactory.dropSourceDataStore(OdiSdkEntityFactory.java:523)
at oracle.odi.ui.etlmodeler.diag.dragdrop.DiagramNodeDropHandler.dropObjects(DiagramNodeDropHandler.java:150)
at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.dropSelected(DelegateChooserDropHandler.java:386)
at oracle.modeler.dnd.ModelerTCDropHandler.access$001(ModelerTCDropHandler.java:69)
at oracle.modeler.dnd.ModelerTCDropHandler$3.run(ModelerTCDropHandler.java:288)
at oracle.modeler.dif.GraphicAdder.addImpl(GraphicAdder.java:387)
at oracle.modeler.dif.GraphicAdder.addAndLayoutImpl(GraphicAdder.java:372)
at oracle.modeler.dif.GraphicAdder.addSelectAndLayout(GraphicAdder.java:348)
at oracle.modeler.dnd.ModelerTCDropHandler.dropSelected(ModelerTCDropHandler.java:284)
at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.drop(DelegateChooserDropHandler.java:150)
at oracle.diagram.framework.dragdrop.DefaultDropPlugin.drop(DefaultDropPlugin.java:115)
at oracle.modeler.dnd.ModelerDropPlugin.drop(ModelerDropPlugin.java:100)
at oracle.diagram.framework.dragdrop.DropTargetHelper.drop(DropTargetHelper.java:188)
at oracle.diagram.framework.dragdrop.ManagerViewDragAndDropController$MyDropTargetListener.drop(ManagerViewDragAndDropController.java:802)
at java.awt.dnd.DropTarget.drop(DropTarget.java:434)
at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:519)
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:832)
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:756)
at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)
at java.awt.Component.dispatchEventImpl(Component.java:4487)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4312)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)Hello,
does somebody have a solution for this issue?
I am new to ODI and have the same problem. I am using ODI Designer Standalone Edition Version 11.1.1.
Maybe there is something wrong with my configuration, maybe I am doing something wrong while creating the mapping graphically. It does not help to save and re-open the mapping. Also it does not help to re-reverse engineer the objects. Also it does not seem to have something to do with the number of objects joined (some objects seem to always cause this error, with some the error starts when there are 10 or more objects on the map before they are added).
One possible workaround i have found is to do it all on the quick-edit tab by one by one creating the joins and mappings (+source or lookup joins and filter mapping). It seems to work with my configuration, but drag&drop functionality on the mapping tab would sometimes be faster, more convenient and just more human like.
Br,
Jaanus
Maybe you are looking for
Slui.exe 0x2a 0xc004f015
-
My wife,my son,and I all have the 80gb classic and I would like to be able to put a movie on my son's that I have on my computer.I would like to know is there any way that I can do this even though he has been using his own computer and Itunes? Someo
-
Hi all i have 2 webdynpro components Comp1 Comp2 Now i have declared a global attribute in comp1 in component controller. I have embedded both component together to share values I want to change the global attribute of comp1 from comp2 Let me know ho
-
Hi guys, Some time I found a thread where, among other things, someone made a summary of the most updated drivers and the wifi one, for example, was way more reliable, etc. I would swear that thread was on this forum, but I don't seem to be able to f
-
Hey there, I just had a quick question about how exactly the video embedding works. I'm currently making an eBook, and am seriously considering purchasing the Pro version of acrobat 9 (or pre-ordering x). With that said, would I need to include the v
-
about 1/4 of the sites i vist now (including my own--in safari) have a 'block A' character where there is html text. does anyone know how to fix this? thanks.